« Back to all recent discussions

Beeping Zyxel 326

NowhereNowhere Posts: 3  Junior Member
edited January 14 in Questions
My Zyxel 326 had started beeping at me about once a minute or so. Support said they're is something wrong with the drives. I tested them and they are fine I even put in two other drives and it still beeps at me. I've even tried it without any drives and I still get the beeping and I can't access the nas via windows. Any ideas?


Best Answer

  • NowhereNowhere Posts: 3  Junior Member
    Accepted Answer
    I followed these instructions from support. Pulled out both drives, disconnected power, disconnected the cat 5 cable. Hit the reset button till it beeped twice, put everything back in place and now it works fine and both drives show as healthy.


  • TeemoTeemo Posts: 46  Junior Member
    I tested them and they are fine
    How do you test them?
    Do you check "Hard Disk > DiskX > S.M.A.R.T > Overview/S.M.A.R.T Info"?
    What is the result? Shows disk as Good or Bad?

    If you pull out all disks, is NAS326 still beeping? And do you able to access web interface of NAS326 at the moment?

  • NowhereNowhere Posts: 3  Junior Member
    I checked them using Seatools and they show good. Pulling both drives it still beeps. I am not able to access the web interface currently.
  • TeemoTeemo Posts: 46  Junior Member
    Forum user Mijzelf has collected some recovery sticks.

    Please try, unzip the right one to the USB stick, put it in a back port, and reboot the NAS.
    Hope it can help you.
Sign In or Register to comment.