« Back to all recent discussions

NSA325 not available

FlecksFlecks Posts: 3  Junior Member
edited February 11 in Questions
i need help, my NSA 325 does not responsed. 
When i pluged in the NAS the Power LED and the HDD2 LED is lights up.
The NAS gets no IP from the Router.
The USB-Ports has no Power.

I try to reset it the NAS but didnt work, while the Reset there is no Beep.

Have anyone a idee what can i do?



  • MijzelfMijzelf Posts: 707  Heroic Warrior Member
    Is the behavior different when you start the NAS without disks?
  • jackwatsonjackwatson Posts: 1
    edited February 23
    Did you try reformatting it? I guess that's what you would have to do as a last resort. This guide was a bit helpful to me (https://routerlogin.mobi/192-168-0-2/). Let me know if that works.
  • FlecksFlecks Posts: 3  Junior Member
    Hey :)
    Mijzelf yes, before i try to reset i pulled out the Disks, because i dont know if the reset erase the disks.

    jackwatson what you mean "reformatting" ? I have no access to the WebInterface 

  • MijzelfMijzelf Posts: 707  Heroic Warrior Member
    In that case I'm afraid you have a hardware defect. Maybe it's the power brick, if you have another, try it, and else you can consider it dead.
  • FlecksFlecks Posts: 3  Junior Member
    i measured  the power brick and i have 12.3V.
    I tried (without the DISKs)  the Router power brick with 12V and 1.5A and the same problems :/
Sign In or Register to comment.